Microfoni
In questa sezione della mia pagina (che sarà in costante aggiornamento ) ti segnalerò i prodotti che io reputo più interessanti per il tuo home recording Studio.
Non mi fermerò a guardare solo le marche più famose, ma cercherò di scovare anche marchi meno conosciuto che possano essere interessanti per lo sviluppo del tuo progetto !
Lewitt Lct 240 Pro
Cardioid Gold coated 17 mm capsule Stable metal construction Dynamic range: 121 dB-A Capsule size: 17 mm Sensitivity: 16.7 mV / Pa (-35.5dBV) Nodule (IEC 61672-1) Impedance: <330 ohms Dimensions: 138 x 52 x 36 mm Weight: 310 g Colour: Black Includes bag, shock mount and windscreen
Lewitt Lct 441 Flex
8 Directional characteristics to choose from 5 Front characteristics: omnidirectional, wide cardioid, cardioid, supercardioid, and figure-8 Gold-plated 25.4 mm capsule Dynamic range: 134 dBA Max. SPL (sound pressure level) (0.5% THD): 140 dB Robust zinc diecast housing Gold-coated 3-pin XLR plug Dimensions: 138 x 52 x 36 mm Weight: 310 g Incl. DTP 40 Lb leather case, LCT 40 SH microphone shock mount, LCT 40 PSx of magnetic pop filter, LCT40 Ws windshield
Akg P220
1" condenser microphone Full metal housing Cardioid characteristic Frequency range: 20 - 20000 Hz Switchable low cut at 300 Hz Switchable -20 dB Pad Maximum SPL: 135 / 155 dB Diameter: 53 mm Length: 165 mm Weight: 525 g Colour: Black Incl. shock mount and transport case
Rode NT2
Rode NT2 A DeLuxe shock mount SM6 with fabric pop filter 6 m XLR cable Dust cover bag Professional 1" largediaphragm microphone Switchable characteristic (omnidirectional, figure-8, cardioid) 3-way low cut filter (flat, 40Hz, 80 Hz) and 3-way pad switch (flat, -5 dB, -10dB) Frequency range: 20 Hz - 20 kHz Max. SPL: 147 dB 48V Phantom power Dimensions (H x W x D): 209 x 55 x 55 mm Weight: 860 g
Audix I5
Micing from above and below possible Professional dynamic microphone Polar pattern: Cardioid Frequency response 50 - 16 kHz Impedance 150 ohms Max. SPL 140 dB Also suitable for wind instruments such as trumpet, trombone etc.! Includes carrying bag, microphone clip and thread adapter
Shure SM57
Cardioid Contoured frequency response for clear instrumental and sonorous vocal recordings Decrease of percussion, drums and instruments amplifiers in professional quality Cardioid for isolated signal source and reduces distracting background noise Pneumatic shock minimizes handling noise Holds even heavy use in stage use was Frequency response: 40-15000 Hz Output Impedance: 310 Ohm Open circuit sensitivity: -54.5 dBV / Pa (1.88 mV) Dimensions (L x Ø): 157 x 32 mm Weight: 284 g Incl. clamp, 3/8"Thread Adapter and Bag
Lewitt MTP 550 DM
Cardioid polar pattern Frequency range: 60 - 16000 Hz Sensitivity: 2 mV / Pa, -54 dBV / Pa Internal resistance: 300 ohms Nominal load impedance: 1000 ohms Gold-plated 3-pin XLR connector Weight: 0.4 kg Includes microphone clip. Wind protection and transport bag
Audix OM2
Hyper-cardioid Frequency range 50-16,000 Hz Sensitivity 140 dB SPL max. Impedance: 250 Ω Zinc metal housing XLR connector
Audio Technica AT2050
3 Switchable characteristics: Cardioid, omnidirectional, figure eight Frequency range: 20 - 20,000 Hz Switchable Low-Cut 80 Hz Switchable -10 dB pad Impedance: 120 Ω 149 DB SPL max. Weight: 412 g Incl. AT 8458 Tripod adapter and bag
Audio Technica AT2020
16 mm diaphragm Cardioid characteristic Frequency range: 20 - 20000 Hz Signal-to-noise ratio: 74 dB, 1 kHz at 1 Pa Dynamic range: 124 dB (typical), 1 kHz max. SPL Sensitivity: 7 dB (14.1mV) re1V at 1Pa Impedance 100 Ohm Max. SPL: 144 dB (1kHz, 1% THD) Requires 48V phantom power Dimensions 162 x 52 mm Weight 345 g Incl. mount and pouch
Slate ML-2
Optimised for Slate Digital VRS8 audio interface and Slate Preamp similar linear and flat frequency response as the Slate Digital ML-1 Enables microphone placement that is difficult or impossible for a larger microphone Side-mounted pad switch - attenuates input signal and re-polarises the capsule to emulate both dynamic and condenser microphones Includes license for VMC 'Classic Instruments' software
Austrian Audio OC818
Switchable directional characteristics: omni, cardioid, hyper cardioid, figure eight Freely configurable polar pattern via PolarDesigner plug-in for Win and Mac Real-time polar patterning via OCR8 Bluetooth dongle (Art.467336 - not included) and PolarPilot app for Android and iOS Handmade CKR12 ceramic capsule based on the CK12 capsule Frequency range: 20 - 20,000 Hz Sensitivity: 13 mV / Pa Output impedance: 2 x 275 ohms (balanced) Input impedance: 1 kOhm Max. SPL: 148 dB / 158 dB (with pad) Noise: <10 dB SPL Signal-to-noise ratio:> 84 dB Requires 48 V phantom power Low Cut Filter: 40, 80 and 160 Hz Pad: -10 dB and -20 dB Includes elastic shock mount, microphone clamp, windscreen, mini XLR adapter and case Dimensions: 157 x 63 x 35 mm Weight: 0.36 kg
AKG D112
Suitable for bass drums, electric bass, tubas Successor to the D112 but with improved mechanics Polar pattern: Cardioid Frequency range: 20 - 17,000 Hz Impedance: 210 Ohm Weight: 320g Dimensions: 150 x 70 x 115 mm
Audix D6
Professional dynamic large diaphragm microphone Also suitable for electric basses, etc Cardioid polar patten Frequency range: 30 - 15,000 Hz Impedance: 200 Ohm Max SPL: 144 dB Sensitivity: 0.8 mV/Pa @ 1 kHz Weight: 254 g